Arctic Hybrid Buffer Chill/Heat Tank - 55 Gallons

USD$ 2,034.05
SKU: N-402
26 In Stock

ARCTIC HYBRID HEAT/CHILLER TANK - 55 GALLONS

The Argosy Buffer Tank by Flexcon Industries is the only pressurized composite buffer tank on the market.

The Arctic Hybrid Buffer Tank is the only pressurized composite buffer tank on the market. Better insulated than steel buffer tanks, roughly half the weight and it won’t rust!

Arctic Buffer Tanks will never corrode and are half the weight of steel buffer tanks. These advantages can reduce labor costs on installations while being a cost-effective way to improve system efficiency by reducing heat pump short cycling during low load periods and hydraulically separating the source from the distribution system. Rated to 180 degrees F at 75 PSI and 140 degrees F at 100 PSI, our NSF approved polypropylene core wrapped in a blend of continuous strand fiberglass and a high temperature resin makes the Arctic Buffer tank perfect for hydronic heating and cooling, low mass boiler systems and chilled water applications. Arctic tanks are insulated with a closed cell foam that provides a R-value that is unmatched by the competition and has a heat loss of less than 1 degree/hour. Tanks are available in sizes of 22, 40, 55 gallons and all come with 4 stainless steel side ports, a thermal well (40 & 55 gals), vent, vacuum breaker and drain.

Operation: The primary application of a buffer tank is to reduce heat pump, chiller, or boiler short cycling. Hydronic buffer tanks are used in systems operating below the design load condition, which is most of the time, or in systems having several low BTU cooling or heating loads calling at different times. This can cause the heat pump or the boiler to short cycle, resulting in reduced operating efficiency and shorter equipment life.

What It does: The buffer tanks are built with 4 connections. Two connections can be piped to the heat pump or boiler, and two connections can be piped to the distribution system. If piped correctly, the tank can serve as both a thermal buffer and a hydraulic separator. The heat pump or boiler can be hydraulically decoupled from the distribution system.

Highest Efficiency – No other buffer tank matches the Arctic Hybrid Tank in terms of heat loss efficiency. With a heat loss of 41% than the next comparable buffer tank, the Artic Hybrid Tank outperforms and save money and will never rust out!

Materials of Construction

01

Shell:

Durable matte black polypropylene
02

Inner tank:

Copolymer polypropylene tank reinforced w/ fiberglass and coated w/ epoxy resin
03

Insulation:

High R value, injected closed cell foam

Ratings

01

180 Degrees F / 75 PSI

02

140 Degrees F / 100 PSI

Connect with an Arctic Heat Expert

Fill and select all the * marked fields to submit. Our team will respond as soon as possible!

Arctic Heat pumps Logo

LET US HELP

OUR PRODUCTS

RESOURCES

RESOURCES