| Name | Dan Di Bonaventura |
|---|---|
| Email address | dandbon@gmail.com |
| Phone number | |
| Where is your project located? | United States |
| State/Province | New Jersey |
| Nearest City or County | Ocean |
| How would you like use to size your system? | Size by Square Footage and Location |
| Estimated Heating Demand | 10.3 kW ( 35153.9 BTU/hr ) |
| Output of selected heat pump at design temperature (-30C/-22F maximum) | 11kW |
| Percentage of demand load requirement produced by heat pump at design temperature (-30C/-22F maximum) | 107% |
| External backup boiler required | 12kW |
| Internal backup boiler required if using Alt Source tank | 12kW |
| Heating Design Temperature | 15° F |
| Total Square Footage (sq. ft.) | 3400sq.ft. |
| Insulation | Medium |
| Arctic heat pump required | 050ZA/BE |
| Comments | Email is preferred. I am designing a house to build in NJ. Zip 08016. It'll be a 3400 sqft house with an attached garage. the 1st floor living area will be 2200 sqft and second floor is around 1200. only the first floor will have hydronic heated floors and the garage will have heated floors but not kept at the same temp as the living areas. approx garage sqft is 850. I'm looking at options for heating and cooling and would like a recommendation/rough quote for a few systems. One would be everything, heating, cooling with fan coils, and a hot water heater system, another would be heating and cooling just the first floor, another would be no cooling and just a hot water and heated floors with a supplemental mini split for the rest of the heating and cooling needs. Thank you. |
| Contact by Arctic Agent | Yes |
*NOTE* - The heating demand load we have estimated for this project is likely to be inaccurate. There are many variables that factor into a building’s heating demand, and although square footage and insulation value are major factors, many other building variables contribute. We compared the results of this tool against hundreds of custom manual J reports and found that this tool predicted the demand load within +/- 10% of actual calculated load in 25% of the manual J results we compared to. This tool has limited accuracy when predicting the demand load of a single project but is very accurate at predicting average demand loads on a macro scale.
To get a more accurate estimation of the final demand load range for your unique project, we suggest you run this tool at all three insulation value options (High, Medium, Low). 90% of the manual J reports we compared to have a demand load that fits within the three predictions generated by running this report at all three insulation values.
Arctic takes no responsibility for any performance issues resulting from using this estimation to size a heat pump. We recommend that every customer has a manual J conducted before purchasing heating and cooling equipment. A manual J is the most accurate way to predict a building’s demand load.
If you would like Arctic to conduct a manual J for your project, please click the link below:
Have questions about our energy-efficient heating solutions? We're here to help! Whether you need product details, installation support, or assistance with an order, our team is ready to assist you.
Get in touch, no matter where you’re at in your project plans. We’d be so happy to help!
