Hydronic Pumps Cost

Advanced Hyronic Controller for Full Home Heating Advanced heating controller for hydronic floor systems, pools, boilers, heat pumps and solar thermal Model: N-285 Weight: 1lbs Manufactured by: RESOL The RESOL DeltaSol® MX system controller is the most advanced heating controller available with features that will allow over 1,000,000 combinations of configuration. All on an easy to program LCD screen. The MX controller is ideal for combining different heating sources including heat pumps and solar thermal. It can control up to 14 zones and has 19 sensor inputs inlcluding variable speed pumps with PWM inputs and Grunfos Direct Sesors. The buit in SD card can store data or it can be uploaded to the free Vbus.net for customized layout and live webviewing. Download Product Brochure FEATURES 14 relay outputs and 12 inputs for Pt1000, Pt500 or KTY temperature sensors Up to 5 extension modules via RESOL VBus® (45 sensors and 39 relays in total) Inputs for analogue and digital Grundfos Direct Sensors™ Integrated control of up to 4 high-efficiency pumps via PWM outputs Data logging, storing, easy transfer of controller adjustments prepared and firmware updates via SD card Cooling over the heating circuit with condensation detection by means of a dew point switch Simplified timer, 0-10 V boiler control and DHW preheating Remote access to the heating circuits with room control unit(s) or the VBus®Touch HC App Extended optional functions, e.g. solid fuel boiler function with mixer and target temperature contro SPECIFICATIONS Inputs: 12 Pt1000, Pt500 or KTY temperature sensor inputs (can optionally be used for remote controls, operating mode switches or potential-free switches), 3 impulse inputs for V40 flowmeters, 1 input for a FlowRotor, 1 CS10 solar cell, 4 Grundfos Direct Sensors™ (2 x analogue, 2 x digital) Outputs: 14 relays, 13 of them semiconductor relays for pump speed control, 1 potential-free relay and 4 PWM outputs (convertible to 0-10 V signal outputs) PWM frequency: 512 Hz PWM voltage: 10.5 V Switching capacity: 1 (1) A 240 V~ (semiconductor relay) 4 (1) A 24 V DC/ 240 V~ (potential-free relay) Total switching capacity: 6.3 A 240 V~ Power supply: 100 ... 240 V~ (50 ... 60 Hz) Supply connection: type Y attachment Standby: 0,84 W Temperature controls class: IV Energy efficiency contribution: 5 % Mode of operation: type 1.B.C.Y. action Rated impulse voltage: 2.5 kV Data interface: RESOL VBus® VBus® current supply: 35 mA Functions: solar system controller for use in solar and heating systems. 7 integrated calorimeters and control of weather-compensated heating circuits. Adjustable system parameters and add-on options (menu-driven), balance and diagnostics functions, function control according to VDI 2169 Housing: plastic, PC-ABS and PMMA Mounting: wall mounting, mounting into patch panels is possible Indication/Display: full graphic display Operation: 7 push buttons at the front Ingress protection: IP 20 / IEC 60529 Protection class: I Ambient temperature: 0 ... 40 °C Pollution degree: 2 Dimensions: 253 × 200 × 47 mm We want you to be 100% satisfied with your purchase, if you are not, ship it back to us in the original packaging condition and we will refund your purchase less a 10% restocking fee, provided the equipment is received in good condition. Refund offer valid for 30 days from receipt of product.

RESOL DL2 Data Logger – Online Access This additional module enables access to the VBus.net online FREE monitoring platform. The acquisition and storage of large amounts of data (such as measuring and balancing values and pump on/off runtime of the hydronic system) over a long period of time. The DL2 is easily configured to read-out with a standard interment browser via its integrated web interface. For transmission of the data stored in the internal memory of the DL2 to a, router or PC, an SD card can also be used. The DL2 is appropriate for all controllers with RESOL VBus®. Including the RESOL MX controller.  The data logger transmits the stored data to the Vbus.net platform where you can view real-time results as well as historical data on the system’s performance.    Requires Ethernet connection to router.  Optionally it can be connected to wireless bridge and transmit wirelessly to router. Download Product Specification PDF ReSol DL2 Data Logger

Wireless Outdoor Sensor - HBX WAV-0110 Introducing the new HBX Wireless Outdoor Sensor, the WAV-0110. This wireless outdoor sensor goes against all conventional wireless technology. While others communicate only with their own devices, HBX has developed a way to broaden horizons. The WAV-0110 is able to connect to any control that uses a thermistor input and connect to boilers, reset controls, thermostats and many other devices without exterior wiring. This makes the WAV-0110 perfect for retrofits as well as new installations. The WAV-0110 can communicate up to 2000' open air between the base and outdoor unit. The outdoor unit can also utilize the use of an external sensor if required. The WAV-0110 is a 2 part sensor The wireless base unit connects directly to the outdoor thermistor input of your device. The wireless outdoor unit is placed outside. Up to five (5) base units can communicate to one (1) outdoor sensor. Features & Benefits 01 500/5k/10k/12k Thermistor options built in dipswitch selectable 02 2000 foot open air range (2.4 GHz Frequency) 03 Minimum 2 year battery life – 2 AA's (included) 04 Up to five (5) devices can communicate to one (1) outdoor sensor 05 External sensor can be utilized to the outdoor sensor 06 Temp range: -20F – +225F 07 Proprietary pairing and communication protocol 08 No Electrician needed to wire up- saves time and money 09 Simple to install and easy to pair 10 Battery life indicator 11 See where to place the sensor based on signal strength indicator: range 1-6 12 Made in Canada Visit hbxcontrols.com to view the manual and other documentation.

RESOL TS10 - Dew Point Switch The TS10 Dew point switch is designed for condensation detection in a heating circuit used for cooling purposes. If the relative humidity falls below the adjusted set value, the TS10 will switch a potential-free contact. DIMENSIONS Technical Data 01 Operating capacity: 50 - 95% relative humidity 02 Measuring accuracy: +/- 3% relative humidity 03 Switching difference: (microswitch) at 50% relative humidity: approx. 4% relative humidity 04 Switching capacity: 48 VAC maximun; 1 - 100 mA (switches with gold contacts) 05 Working life: 100,000 switching cycles 06 Ambient temperature: 0 - 60°C 07 Temperature coefficient: -0.2% relative humidity /K at 20°C and 50% relative humidity 08 Half-value time at v=2 m/s: 1.2 min 09 Mounting position: Any position 10 Measuring element: hygrostat, water-resistant 11 Dimensions: 85x55x33 mm 12 Weight: approx. 80 g

RESOL FRH - Humidity Sensor The FRH relative humidity sensor is used for measuring the relative humidity as well as the room temperature. For connection to the DeltaSol® MX and DeltaTherm® HC MAX from version 2.06 and DeltaSol® BX Plus (FRHd only) from version 2.06 FRH Humidity sensor (analogue) » incl. JST connection cable Technical Data 01 Housing: For in-wall mounting, Material ASA, colour: pure white, similar to RAL 9010 02 Cable gland: at the back 03 Protection type: IP 10 according to EN 60529 04 Dimensions: 84.5 x 84.5 x 25 mm 05 Measuring range: Humidity: 0 - 100% RH Temperature: 0 - 40 °C 06 Ambient temperature: 0 - 40°C DIMENSIONS (mm)

RESOL FRHd - Digital Humidity Sensor The FRHd relative humidity sensor is used for measuring the relative humidity as well as the room temperature. For connection to the DeltaSol® MX and DeltaTherm® HC MAX from version 2.06 and DeltaSol® BX Plus (FRHd only) from version 2.06 FRHd Humidity sensor (analogue) » incl. JST connection cable Technical Data 01 Housing: For in-wall mounting, Material ASA, colour: pure white, similar to RAL 9010 02 Cable gland: at the back 03 Protection type: IP 10 according to EN 60529 04 Dimensions: 84.5 x 84.5 x 25 mm 05 Measuring range: Humidity: 0 - 100% RH Temperature: 0 - 40 °C 06 Ambient temperature: 0 - 40°C DIMENSIONS (mm)

RESOL FAP13 - Outdoor Temperature Sensor The RESOL FAP13 is used for measuring the outdoor temperature with a Pt1000 measuring element. The FAP13 is placed in a weather-resistant housing and is designed for mounting outdoors. Cable glands for the sensor cables at the bottom of the housing allow easy installation. Technical Data 01 Dimensions: 111 x 68 x 40 mm 02 Sensor: Pt1000 DIMENSIONS (mm)

Advanced Heat Pump Controller - HBX ECO-0600 The ECO-0600 is designed to be a stand –alone outdoor reset control device. The purpose and function of the ECO-0600 is to provide control for geothermal applications with the ability control equipment in a 2 pipe, single or dual tank, hydronic heating or cooling system. Heat Pump & Backup Control The ECO-06000 can control up to four (4) heat pump stages (air-to-water or water-water) or chillers and a reversing valve with outdoor temperature reset control. This powerful control can control a backup heat source (boiler) while operating three (3) heat pump stages. The backup heat source can be brought on with a few different options based on outdoor or tank temperatures. The control can manage single tank or dual tank applications with separate hot and cold tanks. The control also features DHW (domestic hot water) control with any application. Remote Access Anytime, Anywhere Used in conjunction with the free HBX Sensorlinx™ mobile app, users can control their geothermal system remotely from there smartphone or tablet devices with the ability to adjust heat pump and backup parameters, monitor tank temperatures, equipment operation status and receive alarm notifications. Features & Benefits 01 Control up to 4 heat pump stages 02 Backup boiler control 03 Single or dual tank modes 04 DHW control 05 Runs reversing valve or 3 way mixing valves 06 Lead lag on heat pumps 07 Heat pump rotation on time or cycles 08 Alarm notification on tank temperature via the Sensorlinx™ app 09 Outdoor temperature reset 10 System and hot/cold tank pumps with exercising and post purge 11 Limited 2 year warranty 12 Made In Canada Dimensions Visit hbxcontrols.com to view the manual and other documentation.

Hydronic Zone Controller - HBX ZON-0600 This revolutionary control allows you to customize exactly your needs and wants for any application including radiant floor and forced air system control or a combination of both. The ZON-0600 can operate zone valves or zone pumps, the choice is yours. Each module allows control up to 4 individual zones with the ability of wireless expansion between modules. Unlike your typical zone control the ZON-0600 features a full colour touch screen display that allows you to view multi-zone operation status and zone temperatures. The control features a bigger enclosure (double in size) than its predecessor (ZON-0550) for increased space for equipment wiring. The enclosure also features a brand new black glossy colour that will update and modernize any mechanical room. Each controller is now Wi-Fi enabled eliminating the need to use the Thermolinx Wi-Fi module for online connection. Each zone can be viewed or configured from your smartphone or tablet devices, allowing you to control your comfort anytime or anywhere. With so many features integrated into the ZON-0600 the control allows for customized options including selectable pump and demand outputs, pre and post purge run times with exercising options, and the ability to tie in an auxiliary thermistor to run a setpoint directly off the ZON-0600 (ex. DHW setpoint without using the zone output). The new design incorporates a new pairing process that utilizes an internal Wi-Fi protocol between modules that further extends the communication distance and reduces the chance of interference with other operating systems. This process also allows for communication for demands, dampers and their priorities, amongst one another. Features & Benefits 01 Control up to 4 individual zones plus 1 setpoint per module 02 Wireless expandability up to 20 zones 03 Pump, valve and damper control 04 Multiple heating and cooling modes 05 Humidity control 06 Fan control (on/off/intermittent) 07 Zone priority 08 Programmable schedules 09 2 Wire thermostat (THM-0600) 10 Wi-Fi Enabled (TMX-0100 is no longer required) 11 Remote Software updates via the web 12 View zone temperatures and operation status on the main screen 13 Bigger wiring enclosure for easy installation 14 Full colour touch screen display on the ZON-0600 15 Share demand communication between modules wireless 16 Selectable pump output options 17 Programmable post purge and exercising options 18 3 selectable demand outputs (HT, LT, HD, HD2, CD,CD2, AUX, APP) 19 Pairing process is done through zone control 20 External thermistor input to run a setpoint directly from the control 21 Ability to control more than four dampers with multiple controls 22 Warm weather shut down feature to prevent heating equipment to turn on in warm temperatures 23 New THM-0600 interface (scroll feature) 24 Limited 2 Year Warranty. Made In Canada Dimensions Visit hbxcontrols.com to view the manual and other documentation.

Touch Screen Thermostat - HBX THM-0600 The THM-0600 is a 4 stage fully programmable P.I.D. thermostat for hydronic heating and cooling systems. The large, full graphic display is easy to read and simple to navigate using the touch screen control. When connected to the internet with the Wi-Fi zoning system, the HBX SensorLinx mobile app allows you to control the thermostat remotely anytime, anywhere. The THM-0600 is designed to work only with the HBX Wi-Fi Zoning System and utilizes only two wires (power and communication) to the ZON-0600 zone control. This eliminates the need to pull wire which makes it ideal for retrofits as well as new installations. The thermostat has two auxiliary sensor inputs that can be used for internal room, external floor or outdoor sensing options. The thermostat includes a universal external sensor with a 10” lead. The THM-0600 incorporates a built-in humidity sensor for humidity control. Auto humidity allows the thermostat to humidify or dehumidify to the target % automatically based on the outdoor temperature. No manual adjustment is required. The zoning system must be connected to a wifi network for this feature to be applicable. Program your heating and cooling system around your schedule. With four (4) different schedule options you can be comfortable anytime of the day. Away mode will override the schedule to lower the temperature and increase energy savings. NOTE: The THM-0600 is designed to work with the ZON-0600 Zone Control. It is not a standalone unit. Dimensions Features & Benefits 01 Mobile app for Android and Apple devices (SENSORLINX COMPATIBLE) 02 2 Wire thermostat 03 Multiple heating and cooling modes 04 Includes 10' floor sensor for radiant floor heating and cooling 05 Auto heat/cool changeover 06 Away mode for energy savings 07 Automatic humidity control (available only on Version 2.0) 08 Outdoor temperature display by internet (available only on Version 2.0) 09 Time clock update by internet 10 Large, Full Color Graphic Touch Display 11 Easy Programming Menus 12 Programmable schedules 13 Geothermal mode 14 Zone priority 15 DHW capabilities (digital Aquastat) 16 Made In Canada Wiring Visit hbxcontrols.com to view the manual and other documentation.

Solar Sensor Well Port - 1/2" NPT Half inch temperature sensor for solar thermal application. Solar Sensor Well Port - 1/2" NPT Self-sealing with silicone O-ring, nickel plated, for sensor with a diameter of 5.5 mm, depth = 30 mm TH45 G1/2" SW24 With integrated PG7 cable gland temperature range 302 degrees Fahrenheit (150 degrees Celsius)